Stellar65 - Night Runner Edition
The Stellar is a collaborative project between Space, Qlavier & Yiancar - this time with a hint of BlindAssassin111.
Made in Austin, TX - Enjoy!
- Fluorescent Green case, frosted black plate (integrated)
- Custom PCB designed by Yiancar (solder only)
- VIA compatible (Access VIA)
- 6-degree typing angle
- Per-key & Backlit RGB
- Case thickness: 22.5mm
- USB-C port
- 65% layout / 4-key upper right-side cluster
- Designed by Qlavier & Space
- Ships in a custom-branded carrying case
- 1.6mm PCB
Check out GMK Night Runner R2 here.
Also, check out the GMK Night Runner R2 companion items here.
Stellar65 - Night Runner Edition Case
- 8-layers of masked acrylic
- 16 x M2 8mm screws
- 8 x M2 14mm brass hex standoffs
- 1 x 1.3mm Hex key Allen Wrench
- Nebula 68B PCB (solder only)
Stellar65 - Night Runner Edition Feet
- 3-layers of masked acrylic
- 6 x M2 6mm screws
- 3 x M2 6mm brass hex standoffs
- 4 x 8mm * 2mm black bump-on feet
- 1 x 1.5mm Hex key Allen Wrench
- USB cable
Read about our acceptable quality standards here.
60-Second Build Guide:
Solder Build Guide
Note: The Stellar65 - Night Runner Edition is only aesthetically modified from the original Stellar65, functionality remains the same - meaning the standard solder build guide is recommended.
*Do not forget to include the support plate underneath the switch plate.
Please test PCBs prior to soldering, returns or exchanges are not accepted after this point.
Last updated January 01, 2020
If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy.
All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item.
All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier.
To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number.
After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return.
Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns.
The following items cannot be returned:
● DIY cable kits
● Standalone cable parts
● PCB's that have been used
For defective or damaged products, please contact us through the support page to arrange a refund or exchange.
If you have any questions concerning our return policy, please contact us here.